Dry milling and Remanufacturing - Bandmills, Slabbers and Resaws

[ GO BACK to view other dry milling equipment ]

ST100 BAND RESAW

With saw pulley 915mm diameter.
Fitted with: Pneumatic saw straining with low-pressure switch should pressure drop to an unsatisfactory level.
A multi roller fence with 35 degree tilt
Infinitely Variable speeds 5.0 – 60.0 m/min
15kw main motor drive with star delta starter
Emergency stop button Safety limit on door DC braking system

Technical Specification

(Click to enlarge)

Bandsaw thickness:   0.8 - 1.0mm (21 - 19g)
Bandsaw width (max):   100mm (4")
Bandsaw length (max):   5.28 - 5.38m (17’- 4" - 17’- 8")
Pulley diameter:   915mm (36")
Depth of cut (max):   370mm (14.5")
Max Opening:-
Roller fence to saw line (max):   305mm (12")
Feed rolls to saw line (std):   230mm (9") (opt) 280mm (11")
Feed speeds (variable):   5.0 - 60m/min
Main motor:   15kW (20hp)

ST130 BAND RESAW

As a standard the machine includes key features which ensure both its performance and its reliability. These include a power operated heavy duty multi-roller fence; a genuine radial arm operated by soft pneumatics; heavy duty table rollers and much more.

The ST130 combines the performance available from a 130mm wide bandsaw with the convenience of a machine that requires no special fixing other than bolting it to the factory floor. The resulting package is a very high performance radial arm resaw capable of producing quality sawn timber from even the largest of cross sections.

Technical Specification

(Click to enlarge)

Bandsaw thickness:   up to 1.06mm(19g)
Bandsaw width (max):   130mm
Bandsaw length (max):   5765mm (Min) 5637mm
Pulley diameter:   950mm
Depth of cut (max):   400mm
Max Opening:-
Roller fence to saw line (max):   305mm (12")
Feed rolls to saw line (std):   300mm
Feed speeds (variable):   15 - 60m/min
Cleaner Fluid Capacity:   5 litres
Size of machine:
Height x Width x Length:   2500mm x 2800mm x 1600mm
Weight:   2750kg
Working Height:   955mm

VHM36 Radial Arm Resaw

Classic Stenner, robust build
Proven technology tilt facility for angle cutting
Simple to operate
Highly flexible

Technical Specification

(Click to enlarge)

Bandsaw width (max):   100 mm (4")
Bandsaw Pulley Diameter:   915 mm (36")
Depth Of Cut (Max):   350 mm (14")
Opening Roller Fence to Saw Line (Max):   228 mm (9")
Feed Rolls To Saw Line (Max):   228 mm (9")
Feed Speed Range:   10 - 45 m/min (35 - 150 ft/min)
Drive Motor (Std.):   15 kW (20 HP), (Opt) 18 kW (25 HP)
Working Height:   812 mm (2' 8")

(Click top two photos to enlarge)

MHS9 Multihead Horizontal Resaw

Stepless variation of feed speed
Pressure sawguides
Pneumatic saw straining
Modular design
Tilt facility

Technical Specification

Bandsaw Width (Max):   100mm (4")
Bandsaw Pulley Diameter:   915mm (36")
Depth of Cut (Max):   305mm (12") 450mm (18")
Max Opening:-
Saw Unit to Slat Chain Bed:   305mm (12")
Feed Rolls to Saw Line:   292mm (11.5")
Feed Speed Ranges:   7.5-30 M/min or 15-60 M/min
Drive Motor (Std.):   15kW (20HP), (Opt) 18kW (25HP) 22kW (30HP)
Working Height (Chain Bed):   800mm (2’ - 7½")
Angle Cutting Facility as Optional Extra:   0-12º n/a

There are many other configurations of Stenner brand resaws. Contact SCE or visit the Stenner website for further details.

Used Resaws

Ex stock and sourced from overseas.

Re-Rip

Re-rip waste cut stock into high yield finger joint blocks. Custom built to clients request.

[ Return to top of page . . ]